Product Description

MYC Pulley Introduction
* Frame is an important part of the belt conveyor. The rubber lagged pulley can effectively improve the operation of the conveying system, protect the pulley from being worn, prevent the slippage of the conveyor belt, and make the pulley and the belt run synchronously, thereby ensuring the efficient and large-capacity operation of the belt.
* The rubber lagged pulley can also effectively prevent the sliding friction between the drum and the belt, reduce the material adhesion on the surface of the pulley, and thus reduce the deviation and wear of the belt.
* Pulley is widely used in: steel, metallurgy, coal, cement, power generation, fertilizer, CZPT depot, port and other industries.
MYC Pulley Specifications
No. Item Description
1 Brand MYC
2 Belt Width 400mm-2400mm
3 Material Carbon Steel
4 Surface Treatment Powder Coating / Rubber Lagging
5 Surface Color Customized / Black for rubber
6 Type Drive Pulley/Bend Pulley/Wing Pulley/Motor Pulley

MYC Drive Pulley
* Drive pulley is the main component of the belt conveyor transmission power, its way to drive the belt conveyor is with single pulley, double-pulley and multi-pulley.
* Pulley operation is stable, with reliable quality, maintenance-free.
* The design of pulley should fully consider the force condition at all points.
* Pulley structure should be in accordance with the force to use different structural design anf manufacturing.
MYC Bend Pulley
* Bend pulley is mainly used to change the direction of the conveyor belt or to press the conveyor belt to increase the angle with the drive pulley.
* Bend pulley is equipped with a compact structure, light weight, low occupancy, reliable performance, beautiful appearance with safe and convenient use.
* It can still work properly in large dust, wet mud and other harsh conditions.

With good quality and high output, CZPT roller is exported to countries all around the world.

• Product Testing
                                                                                                                                                                                                        

• Company Overview
                                                                                                                                                                                                        
    ZheJiang CZPT Conveyor Co., Ltd, located in the Eurasian bridgehead – HangZhou City Juxian Economic Development Zone, the company occupies more than 300 acres with a production workshop of 13 million square meters. Our company is close to HangZhou Port, HangZhou Port, HangZhou Airport and HangZhou Airport with high-speed around and convenient transportation, providing convenient services for customers with superior geographical advantages.

    Established in 2008, our company is a scientific and technological innovation-oriented enterprise with more than 10 R & D staff and more than 30 technical staff. Our company has independently studied and obtained more than 100 invention patents so far.

    Our company is committed to long distance, large capacity, space turning belt conveyor research and development and manufacturing, the roller, bracket, pulley and steel structure we produced have won praise of domestic and foreign customers. Our current customers are throughout Australia, Canada, the United States, Turkey, Saudi Arabia, Chile, Japan, South Korea, the Netherlands, France, Southeast Asia and other countries and regions.

    Our company attaches great importance to quality control, with high reliability for the design principle, from the source of the product to control the quality, uses advanced technology and equipment. Our company has obtained the “ISO9001: 2008 quality system certification”, “LEVEL III steel structure engineering and mechanical and electrical equipment installation”, “ISO14001: 2015 environmental system certification”, “ISO45001: 2018 CZPT system certification” and ” Production License of dangerous goods packaging and containers”.

     Adhere to the production of first-class products, provide first-class service, adhere to first-class management and create first-class enterprise, our company sincerely looks forward to working with all customers for sincere cooperation and a better future!

• Qualification Certificates
                                                                                                                                                                                                        

 

Types of pulleys and their advantages and disadvantages

There are several types of pulleys. Learn the basic equations of the pulley system. Then learn about the different uses for pulleys. The disadvantages of using pulleys will be covered. Knowing these, you can buy the pulley that suits your needs. Here are some of the best pulley types and their pros and cons.
pulley

Basic equations of pulley systems

A pulley system is a mechanism that allows 2 blocks of a certain mass to be connected by a taut rope. The acceleration of each block is the same in magnitude and direction. The external force acting on each block is the weight of the block (10g) and the tension in the string. The tension between the 2 blocks is the total tension and the force acting on the pulley is the weight of the 2 blocks.
This simple mechanism uses 2 simple equations to explain how the system works. First, the mass of the weight on both sides of the pulley must be the same. When the weight is forced to move, the rope tightens and the second pulley descends. The weight is also attached to the second pulley and must be the same distance as the first pulley. This will result in a speed ratio of 2 times the distance covered by the first pulley.
Second, we have to calculate the force required to lift the object. The lower mass is supported by a wire configuration passing through all pulleys, while the uppermost pulley is used to apply the force. The lower block is used to support the weight. The applied force needs to travel a distance nx to move the weight. This distance, called MA, can be written as:
Once we have gathered the necessary information, we can apply the calculations to the pulley system. We can also use the Mechanical Advantage Calculator to calculate the force on the anchor. To do this, we must apply a force to the load as well as to the pulley itself. Using this equation, we can calculate the force required by the load to lift the load.
pulley

Types of pulleys

There are 3 basic types of pulleys: movable, fixed and compound. Both types of pulleys translate the force applied to them. The ideal mechanical advantage of pulleys is two. This is because a single movable pulley only doubles the force, whereas a compound pulley doubles or triples the force. This type of pulley is often used with other types of pulleys.
Movable pulls move with the weight of the load, and the force pulling them increases on the lift side. They are often found in utility elevators and construction cranes. These systems are very simple, inexpensive and quiet to use. The force required to lift the object depends on the mechanical advantage of the system. The 2 most common types of pulleys are listed below. Let’s take a closer look at each one.
V-shaped pulleys are used in vehicles and electric motors. These pulleys require a “V” belt to function properly. Some have multiple “V” grooves to avoid slipping. They are used in heavy duty applications to reduce the risk of power slip. These pulleys also have more than 1 “V” groove. V-belt pulleys are commonly used in vehicles and electric motors.
Composite pulleys are made from more than 1 type of cable or rope wrapped around the wheel. They can be fixed or hinged and are usually made of stainless steel or bronze. Composite pulleys have multiple layers and can be a single unit or many different components. There are 3 main types of pulleys: fixed pulleys and composite pulleys. These are the most common types. Almost every type of pulley is used for some type of application.
Fixed pulleys have 1 advantage over movable pulleys: they change direction as the weight of the load increases. They are typically used in heavy construction equipment. Gun tackles, patio tackles, and stationary tackles are examples of equipment that use a pulley mechanism. These devices are very common and can be found on most modern construction sites. They provide great convenience for lifting large loads.

application

What are the applications of pulleys? Simply put, a pulley is a mechanical device that transforms a difficult task into an easier one. It consists of ropes and pulleys. It is usually used to lift objects. Usually, people wrap a rope around a pulley and pull up to lift the object. One disadvantage of using pulleys is that they require the same force as lifting the object directly.
One of the most popular applications of pulleys is lifting heavy objects. They help people pull up heavy objects and blocks. The system can also be used in seeders, lifts, grinders, etc. Other applications include raising flags, loading cargo, pulling curtains and rock or mountain climbing. Students can learn about the various uses of pulleys and the physics behind them.
Pulleys can be made of many different materials, depending on the application. Some are movable, which means they move with the object they are used to lift. This pulley system can be made of nylon, wire rope or fiber material. The best part about these systems is that they are easy to install and maintain. For a better grasp, use the guide or video tutorial to learn more about the pulley system and how it works.
Tapered pulleys are common in paper mills. They are high-quality pulleys that transmit power to connected parts. They can be dynamic or static and have different balances. Because pulley systems are highly customized, most industrial applications require systems designed specifically for specific applications. In this way, the system is safe, simple and inexpensive. The benefits of this design are endless.
The most common use of pulleys is for motor drives. They are used to minimize noise by applying force to the shaft to reduce the workload. They are also less expensive than gears and do not require lubrication. Furthermore, they can change the direction of the applied force. They are also less expensive than gears and are often used with other components. A screw is a cylindrical member with helical ribs used to connect something.
pulley

shortcoming

Although the pulley system makes it easier to move heavy objects, it still has some drawbacks. When using a pulley system, you must remember that the force required to lift the weight increases with the number of cycles. In addition, the distance between the puller and the heavy object increases, which may lead to accidents. Also, moving heavy objects can be tricky if the rope slips. Pulley systems are not very expensive and can be easily assembled. However, it does require a lot of space.
First, it is not efficient. Besides being inefficient, pulleys produce different forces at different speeds. Fixed pulleys use more force than the load, while movable pulleys move with the load. A movable pulley requires less force than a fixed pulley, but the combined system travels a long distance. Therefore, this method is not as efficient as the fixed method.
Pulleys are not only used in industrial processes. You can see them in various places in your daily life. For example, large construction cranes use pulleys to lift heavy loads. Even flagpoles, blinds, clotheslines, ziplines, motors and climbing equipment use pulleys. Still, despite their advantages, the disadvantages are not too serious.
Another disadvantage of the pulley is its wear and tear. While a pulley’s housing is theoretically infinite, its bearings and locking components typically wear out over time. To overcome this problem, a new bearing and locking assembly can be installed. No need to replace the housing and shaft, the entire assembly can be re-bonded and painted to replicate the original look. Alternatively, the pulley can be replaced with a new housing and shaft.
Using pulleys can also reduce the advantage of pulleys. On the other hand, interception and tackle is a system in which 2 pulleys are connected to each other using ropes. Unlike pulleys, pulley pulley systems can be adjusted in the direction of travel and can move heavy loads up to 4 times their force when used in hydraulic lifts.

China factory Steel Head Pulley for Heavy Duty Belt Conveyor   with Good qualityChina factory Steel Head Pulley for Heavy Duty Belt Conveyor   with Good quality

Conveyor Pulley

As one of the conveyor pulley manufacturers, suppliers, and exporters of mechanical products, We offer conveyor pulley and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of conveyor pulley.

Recent Posts